How To Care For Stone Floors

Architects, contractors and others who are responsible for the specification of construction materials are always removed carpet and synthetic materials and replace them with natural Stone Flooring such as marble, granite, limestone, slate, terrazzo and terracotta. However, we often forget, before installing the product, how the new floor will be maintained and whether the update will affect the cleaning and maintenance budgets.

What is happening is that the objects remove the elastic parquet and replace it with the stone floors, completely ignoring the cleaning budget and the staff to keep the new floor. This leaves the cleaner in traffic, because the care of the Stone Flooring is very different from other types of surfaces with a hard surface.

Detergents and owners should be on the same page

“Detergents and owners should be on the same page when it comes to the products, equipment and labor needed to maintain the stone floors,” says co-operative Teresa Farmer. e-commerce, products and training in Kelsan. San Distributor in Knoxville, Tennessee. “To meet the expectations of the owners, the person responsible for cleaning the structure must report what is possible.”

Initial costs

As for the Stone Flooring, there are some initial costs that building owners have to consider. The maintenance of stone floors requires the initial investment of a floor machine, diamond pads and stone-specific chemicals. These costs are restored relatively quickly, however, when it is felt that the need for chemicals, paint strippers and complete floor coverings is less than that required for traditional flooring.

“Whenever you can eliminate the incision, as well as finishing and polishing cycle, you can reduce costs by 50 to 65 percent on the belt, finish and polish the floor” – says Bill Griffin, president of consulting services for the cleaning. , Inc., Seattle. “This is a big savings, so these stores and objects remove the VCT cards and other types of surfaces and put them in polished stone or concrete, because none of them needs to finish the floor. of the floor without protective or sacrificial coating. ”

However, if the cleaners are not properly trained to take care of the new Faux Stone Flooring, they can turn against them.

“You do not accept the word and you do not become a marble person, there are differences,” says John Poole, a consultant at the American Institute of Water Treatment in Atlanta. People are trying to do it, they are trying to put a circular shot in a square hole. You have to send people to school so they can learn. Invest in them, pay them money and then they own them.

The equipment is also different. Some equipment is weighed, so you need to make sure you have the right amount of weight. The staff should understand the type of floor to know the required maintenance.

With a large number of plants installing Faux Stone Flooring, industry consultants argue that there is a huge need for cleaning staff to learn how to take care of these types of floors.

“Learning is certainly an important part of the change process,” says Griffin. “If you do not properly educate your people about what they should do, you will not get longevity, life or the type of terrain you want.”

Faux Stone Flooring are a huge investment. When these lands are damaged due to poor cleaning, the cost of the restoration could violate the budget of the installation manager. Therefore, it is important that managers train their employees on how to maintain this type of unique flooring.

Read more in this post:

A Guide To Natural Stone Flooring

Among flooring materials, none is more elegant and luxurious than Stone Flooring. The word “natural stone” identifies some mountain-born mineral substances that stand as opposed to any synthetic or created stone products. Common natural stone flooring includes slate, marble, limestone, travertine, granite, and sandstone–each of which has slightly different properties. It is critical to understand the characteristics of the kind of stone flooring tile you are purchasing to determine whether it is appropriate for a specific location.

As you look for natural stone Tile Flooring, they are the factors that you should question retailers about:

Absorption Rating                                           

The absorption rating refers to how porous a given material is. The more absorbent it is, a lot more susceptible it will be to stains, as well as cracking damage when put through freezing conditions. Natural stones vary greatly in their absorption rates, with sandstone being the most porous to granite, which is almost waterproof even when left unsealed.

In general, sandstone is the most porous natural stone material. Travertine, limestone, and slate have medium absorbency, while granite is relatively waterproof.

Polished materials also absorb less water than honed or cleft surfaces.


Some retailers use a grading system to rate the grade of materials. This may refer to the scale, shape, and thickness of the Tile Flooring, as well as the condition of its surface. Most grading systems have three levels of quality.

Coefficient of Friction

This measures how various slippery materials are. The bigger the factor, the greater traction a tile will have. This number is particularly crucial in moist environments such as bathrooms and kitchens, as well as high- commercial traffic areas. The Americans with Disabilities Act requires that Tile Flooring has a minimum of a .6 dryness coefficient.

Indoor vs. Outdoor Rating

Some natural stone flooring materials tend to be suited to outdoor applications than others. Lots of the factors above will determine whether a material should be utilized within an open-air environment.

Non-vitreous materials will be at the mercy of staining through dirt and acid rain, as well as cracking when absorbed materials freeze and expand. Stones that have a low coefficient of friction will also pose a slipping hazard during rain and snow storms.


Natural stone materials are formed under the earth over millions of years, and frequently include a variety of disparate elements. Sometimes iron is present in these materials, which can manifest as bright red and amber hues in the top of thestone. The challenge in an outdoor environment is the fact that those traces of iron can oxidize, a process more commonly known as rusting. This may cause the complete tile to degenerate as time passes.

Great things about Using Natural Stone Flooring

There are numerous aesthetic and practical reasons why natural stone flooring can be a good choice:

  • Each little bit of stone is a unique creation of the planet earth, making every flooring application one of a kind. Every floor is unique.
  • The mountain-born qualities of the stone can help to give living spaces a direct and eternal link with the natural world, unlike every other building material.
  • While there exists some debate about the ecological impact of quarrying and transporting stone materials, the tiles themselves are natural, nonpolluting, eco-friendly pieces.

When purchasing natural stone flooring materials, it isimportant to do your research and understand the characteristics of the material you are purchasing. Figure out whether it is appropriate for your unique application and how much maintenance it should take.